Contact ETL
How to find us

Catalogues

 

Thermal Management Alarms and Controllers

OMNI SD Speed control for DC  
   

 

 
OMNI SD Speed control for DC fans
Click on drawing to view large scale version
 
SmartFan Omni SD is a versatile switching DC control which operates at a high-frequency to achieve maximum power efficiency at minimum size. Units are available for nominal 12, 24 and 48 VDC operation. Omni SD controllers apply a smooth DC voltage to the air mover for absolute minimum noise. They are compatible with temperature sensors P1 through P9 shown on the Sensors page. Control Temperature is set by means of a jumper on the circuit board. Omni SD is supplied with an optically isolated temperature alarm, triggered if sensor temperature reaches 10°C above Control Temperature or if cooling system power is lost.
 

Features

  • Choose 12, 24, or 48 VDC nominal voltage ratings
  • High power efficiency: typically greater than 90%
  • Noise reduction: typically 15 dB(A) or more at idle speed
  • Constant idle voltage regardless of input voltage
  • Optically isolated temperature alarm output sinks up to 1.0 mA (normally closed)
  • Selectable Control Temperatures of 35°, 40°, or 45°C (74°, 80°, or 86°C when P3 sensor is used)
 
SPECIFICATIONS
 
Part Number
Supply Voltage Range
Maximum Watts to Fans (1)
200 ft/min
Still Air
012D440
10-15VDC
60 Watts/5.0 Amps
48 Watts/4.0 Amps
024D440
20-30 VDC
120 Watts/5.0 Amps
96 Watts/4.0 Amps
048D440
42-58 VDC
240 Watts/5.0 Amps
192 Watts/4.0 Amps
H104
Hardware Pack
(1) Air Temperature of 55°C or less. ; U.S. Patents 4,659,920, 4,722,699 and 5,364,026
 
INSTALLATION
 
Mounting
To minimize EMI, mount the unit on a grounded surface using a metal spacer at the mounting hole that is surrounded by a conductive pad.
 
Sensor Selection
There is no polarity consideration when connecting the sensor. Click here to view Sensors page.
 
 
CONNECTIONS
Figure 1 Wiring Diagram Click on drawing to view large scale version
 
 
   
Copyright © 2002 European Thermodynamics Ltd. All rights reserved.
         ETL terms and conditions apply.