+44 (0)116 279 6899

Filter by date | Filter by category

Automotive Energy Harvesting - Technical Paper Published


Technical paper entitled: Automotive Power Harvesting / Thermoelectric Applications is published in Thermoelectric Materials and Devices, published by the Royal Society of Chemistry

Read more

JOSPEL System Demonstration


Explaining the prototype development of a new energy optimising climate control system for electric vehicles.

Read more

Press Release: NEW - Adaptive® Thermoelectric Temperature Controllers


NEW Adaptive® JUNIOR and CyCLO Thermoelectric Controllers for Precise Temperature Control

Read more

New European Thermodynamics Website Search


The European Thermodynamics website has a new search functionality.

Read more

Congratulations Mark Cooper-Robbins MPhil


Mark Cooper-Robbins graduated recently from Cardiff University with his Masters of Philosophy (MPhil)

Read more

New GCS Thermal Interface Gap Filler Products Now Available


NEW GCS Thermal Interface Gap Filler Products Now Available

Read more

CoACH Thermoelectric Materials Research Project - New Video


A new video has been produced explaining the work that we are doing on the CoACH thermoelectric materials research project

Read more

New Thermal Grease/Putty from Global Component Sourcing


New Thermal Grease/Putty from Global Component Sourcing

Read more

New Adaptive® High Temperature, Power Generation (TEG) Modules


New Adaptive® High Temperature, Energy Harvesting, Power Generation (TEG) Modules

Read more

What is Thermoelectric Cooling and Why Do We Use It?


What is thermoelectric cooling? Thermoelectric assemblies and their applications.

Read more

Adaptive® Energy Harvesting Kit Demo Video


Demonstration video for the Adaptive® thermoelectric energy harvesting kit

Read more

R & D Project HunTER has finished


HunTER - High Efficiency Thermoelectric Cooling R&D Project Finishes

Read more

Adaptive® Energy Harvesting Products Available at


The Adaptive® thermoelectric energy harvesting range is now available to buy directly from the UK

Read more

Scientific Research Paper Published: ZT Optimisation - An Application Focus


New scientific research paper published into why average thermoelectric figure of merit (ZT) as well as peak ZT should be considered when researching improvements to thermoelectric materials.

Read more

Enhanced Energy Harvesting Project Update Q7


The Enhanced energy harvesting project is progressing towards final prototype to be used for
aerospace and automotive applications

Read more

How To Fit a Thermoelectric Module - A Guide


The guide contains considerations for mounting cooler and generator modules, along with more general tips for achieving the maximum potential from your device.

Read more

How To Install a Thermoelectric Assembly - A Guide


This guide covers general guidance and 'good practice' for the installation of a thermoelectric assembly. It is suitable for the range of Adaptive thermoelectric assemblies but the general guidelines can be applied to other brands.

Read more

Products now available on Amazon


A new range of ETDYN products is now available on Amazon.

Read more

HunTER project reaches three quarter stage


Synthesis of doped p-type BixSb2-xTe3 materials including nano-inclusions is progressing with a decision on which composition option to be taken forward

Read more

Enhanced Project Update Q6


Initial n- and p-type materials have been created for printing trials which have been carried out successfully

Read more

Hunter project reaches halfway stage


Update on the Hunter project at the halfway stage.

Read more

Determination Project Update


Project update as Determination reaches the final quarter.

Read more

ElectroTEG Final Results


It was technically very challenging with a core objective of creating thick film electrodeposited n- and p-type materials exhibiting the necessary level of geometric control, surface characteristics, adhesion to substrate and thermoelectric properties that would allow progression to a viable commercial thermoelectric device.

Read more

Enhanced Project Update


The selected marine application has been replaced by an aero application due to revised commercial considerations at Rolls-Royce.

Read more

PRINTEG project completion


The PRINTEG project officially ended 30th November 2015, final report issued.

Read more

HUNTER project start date announced


HUNTER project start date now officially announced as 1st April 2016

Read more

Ceramic heat sinks launched


New range of ceramic heat sinks launch under the Spreadfast brand

Read more

Adaptive Infisense product now available


Adaptive Infisense product now available

Read more

DETERMINATION project gets under way


Update for DETERMINATION project start

Read more

Enabling Technology for Space Exploration


An initiative to create new technologies for space exploration with the University of Leicester

Read more

New products coming soon to Adaptive®!


An energy harvesting kit, a PID controller and a thermally powered wireless sensor device will be released this year.

Read more

H2esot team succeed in the fabrication of organic thermoelectric devices


It is expected that organic thermoelectric materials will play an important role in future thermoelectric devices.

Read more

New thermoelectric cooler modules added


15 new sealed peltier modules have been added to our Adaptive® range

Read more

Update! All Spreadfast® heat pipes are now available through RS Components


The Spreadfast® range of heat pipes are high performance, high efficiency thermal conductors.

Read more

Congratulations Dr Christopher Stuttle


Christopher Stuttle graduated last week from Loughborough University with his Doctorate of Philosophy

Read more

International and European Conference on Thermoelectrics


Four researchers from European Thermodynamics presented at the conference from June 28th to July 2nd, 2015.

Read more

New project, ENHANCED - ENergy Harvester for AutoNomous Commercial Electronic Devices


ENHANCED began with a kick-off meeting on the 12th June, attended by partners Rolls Royce (Marine) and the University of Surrey.

Read more

The key difference between a thermoelectric cooler (TEC) module and a thermoelectric generator (TEG) module


Dr Richard Tuley explains the key difference between the modules and where they can be used.

Read more

New EU project, JOSPEL - Technology to Improve Electric Vehicle Energy Efficiency


JOSPEL aims to develop a novel energy efficient climate control system to help reduce the energy used for passenger comfort in electric vehicles by at least 50 %.

Read more

New project, GRAPHTED - Thermoelectric materials for waste heat recovery using Graphene


Graphted will develop thermoelectric materials and incorporate them into high temperature TEG’s

Read more

ETDYN at the LLEP Business celebration showcase


European Thermodynamics at the showcase, aimed at businesses across Leicestershire.

Read more

TITAN project ends


The final meeting involved the demonstration of a Thermoacoustic (TAG) prototype.

Read more

PhD research job opportunity - Deadline extended!


The research project is with CoACH: ‘Advanced glasses, Composites And Ceramics for High growth Industries European Training Network (ETN)’

Read more

What products can we expect to see in the near future that use thermal energy harvesting?


What products can we expect to see in the near future that use thermal energy harvesting and what needs to be taken into consideration when switching a product from a battery to a thermoelectric generator?

Read more

Welcome to our new website!


The new site was developed with a more a user-friendly experience in mind

Read more

What is thermal energy harvesting?


An interview with Dr. John Allen, Manufacturing Process Engineer

Read more

Adaptive Plant demonstrator shown at Energy Harvesting 2015


There was plenty of interest in the demonstrator at the event and we look forward to developing solutions for some of the companies we spoke to.

Read more

Kevin Simpson at Energy Harvesting 2015


The title of the presentation was: 'Thermoelectric energy harvester with integrated, robust and autonomous sensing system for harsh and hazardous environments'

Read more

ETDYN opens the doors on another site


European Thermodynamics have opened the doors on another site at Debdale Wharf in Leicestershire.

Read more

Innovteg project - New video


As the Innovteg project comes to an end, the partners have released a video explaining the objectives and the developments of the project.

Read more

First prototype created for project H2esot


Itziar spent 8 days working on the prototypes develop thermoelectric materials and produce an improved thermoelectric generator.

Read more

Advances in Energy Storage


Energy storage and energy harvesting has had a lot of interest in the last few years

Read more

Kevin Simpson presents at the Thermoelectric Network conference


Kevin Simpson delivered a presentation on The Development of Thermoelectric Materials.

Read more

Powerdriver project - New video


The Powerdriver project is a collaborative research initiative, partially funded by the Seventh Framework Programme

Read more

TEMPEST Network to launch on the 26th February in Manchester


The TEMPEST network is to launch on the 26th of February 2014 in Manchester.

Read more

InnovTEG - Important Project Deliverables Provided


In recent weeks a number of key deliverables have been generated and submitted to the EU. These cover technical, materials and engineering, aspects.

Read more

InnovTEG - International Conference on Thermoelectrics


The project partners attended the exhibition and presentation programme within the 32nd International Conference on Thermoelectrics

Read more

SMART Proof of Concept Award


European Thermodynamics was awarded a TSB SMART Proof of Concept

Read more

New TSB funded project awarded - Adaptive Energy Harvesting


European Thermodynamics has been successful with an Energy Harvesting competition

Read more

TSB Collaboration Nation Event - Screen Printed BiTe Thermoelectric Devices


TSB 'Screen Printed BiTe Thermoelectric Devices' project completed

Read more

ETDYN continues on extended contract from the European Space Agency


ETDYN continues on extended contract from the European Space Agency

Read more

Icarus - Key Project Deliverables Achieved


Building on the creation of an initial system specification for the waste heat generation system

Read more

ETDYN successful with funding through DECC Advanced Energy Storage Competition


A consortium led by European Thermodynamics has been succesfully awarded funding

Read more

Leicester University 'Space Nuclear Power Systems'


Univerisity of Leicester showcase thermoelectrics in Space Nuclear Power System

Read more

Small/Medium Enterprises Engagement (SMEE) Programme with Coventry University


European Thermodynamics Ltd and Coventry University are engaged on an SME Engagement project

Read more

ETDYN to receive grant from TSB Manufacturing Innovation Fund


Nearly 60 small and micro businesses are to share grant funding

Read more

H2esot project begins


This is an EU funded Future Emerging Technologies project

Read more